|
|
|
AP4010 Evaluation Board "EMP-ARM9"
EMP-ARM9 is the AP4010 evaluation board for the embedded multimedia platform. Since this board contains LCD controller, PAL/NTSC output, Sound input/output, Touch Panel Interface, and so on, it can help you to develop a multimedia product easily. Besides, this board supports Linux / iTRON as its OS, your development cost will be lower.
EMP-ARM9COM is the additional board for EMP-ARM9, with the communication capabilities, such as Ethernet, USB Host, and Serial Interface.
|
 |
Features
- ARM9 based "AP4010" as its processor
- OS : Linux / iTRON > Compilers and drivers are royalty-free.
- All the hardware specifications are released. > you can use this board as your reference board for evaluation before the real development.
- Related items such as a daughter board, a LCD panel, and a dedicated case are ready for you as options.
Product Specification
| Board Computer EMP-ARM9 |
| CPU |
AP4010 CPU Core:108MHz, BUS Clock:108MHz, InstructionCache:8KB, Data Cache:8KB, InstructionRAM:8KB, Data RAM:16KB |
| Memory |
NOR Flash 4MB (16bit bus), NAND Flash 32MB (8bit bus), SDRAM 32MB (16bit bus) |
| Serial I/F |
2ch |
| USB I/F |
USB2.0 Full-Speed (Function)×1 |
| VIDEO Output |
32,768 Color NTSC/PAL |
| LCD Output |
15bit RGB MAX 800×600 dot supported |
| Audio Output |
12bit Stereo 0.25W Output |
| Microphone Output |
Monaural Input 10bit |
| PS/2 |
PS/2×2 |
| GPIO |
44 (Including multi- purpose GPIO pins) |
| Calendar Timer |
Back Up on Built-in RTC Button Battery (CR2032) |
| Switch |
Reset Switch×1, Power Switch×1, General Purpose Switch×3 |
| External Scalable BUS |
Connector for Daughterboard only (0.8mm pitch) 60pin, Connector×1, External Scalable Connector (2.54mm pitch) CN1 60pin : Bus Control Signal CN2 60pin : IO signals |
| JTAG |
20pin Connector 3rd parties' JTAG Debugger supported |
| LED |
Power LED×1, Status LED×1 |
| Power Source/td>
| AC Adaptor:DC5V +-10% or USB Bus Power:DC5V |
| Power Consumption |
Less than or equal to 1W (Board alone, without external load) |
| Base size (mm) |
100×117×1.6 (Not including connectors or projections) |
| Communication Board EMP-ARM9COM |
| LAN I/F |
10 base-TX RTL8019AS (Realtek) |
| USB I/F |
USB1.1 host 2ch ISP1161A1 (Philips) |
| Serial I/F |
UART 1ch TL16C550D (TI) |
| Connector |
50pin Connector×1 (0.8mm pitch) |
| Base size (mm) |
100×80 |
| |
